Name

semop, semtimedop — semaphore operations

Synopsis

#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/sem.h>
int semop( int   semid,
  struct sembuf *  sops,
  unsigned   nsops);
int semtimedop( int   semid,
  struct sembuf *  sops,
  unsigned   nsops,
  struct timespec *  timeout);
[Note] Note
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
semtimedop():
_GNU_SOURCE

DESCRIPTION

Each semaphore in a semaphore set has the following associated values:

unsigned short  semval;   /* semaphore value */
unsigned short  semzcnt;  /* # waiting for zero */
unsigned short  semncnt;  /* # waiting for increase */
pid_t           sempid;   /* process that did last op */

semop() performs operations on selected semaphores in the set indicated by semid. Each of the nsops elements in the array pointed to by sops specifies an operation to be performed on a single semaphore. The elements of this structure are of type struct sembuf, containing the following members:

unsigned short sem_num;  /* semaphore number */
short          sem_op;   /* semaphore operation */
short          sem_flg;  /* operation flags */

Flags recognized in sem_flg are IPC_NOWAIT and SEM_UNDO. If an operation specifies SEM_UNDO, it will be automatically undone when the process terminates.

The set of operations contained in sops is performed in array order, and atomically, that is, the operations are performed either as a complete unit, or not at all. The behavior of the system call if not all operations can be performed immediately depends on the presence of the IPC_NOWAIT flag in the individual sem_flg fields, as noted below.

Each operation is performed on the sem_num−th semaphore of the semaphore set, where the first semaphore of the set is numbered 0. There are three types of operation, distinguished by the value of sem_op.

If sem_op is a positive integer, the operation adds this value to the semaphore value (semval). Furthermore, if SEM_UNDO is specified for this operation, the system updates the process undo count (semadj) for this semaphore. This operation can always proceed — it never forces a process to wait. The calling process must have alter permission on the semaphore set.

If sem_op is zero, the process must have read permission on the semaphore set. This is a "wait-for-zero" operation: if semval is zero, the operation can immediately proceed. Otherwise, if IPC_NOWAIT is specified in sem_flg, semop() fails with errno set to EAGAIN (and none of the operations in sops is performed). Otherwise semzcnt (the count of processes waiting until this semaphore's value becomes zero) is incremented by one and the process sleeps until one of the following occurs:

  • semval becomes 0, at which time the value of semzcnt is decremented.

  • The semaphore set is removed: semop() fails, with errno set to EIDRM.

  • The calling process catches a signal: the value of semzcnt is decremented and semop() fails, with errno set to EINTR.

  • The time limit specified by timeout in a semtimedop() call expires: semop() fails, with errno set to EAGAIN.

If sem_op is less than zero, the process must have alter permission on the semaphore set. If semval is greater than or equal to the absolute value of sem_op, the operation can proceed immediately: the absolute value of sem_op is subtracted from semval, and, if SEM_UNDO is specified for this operation, the system updates the process undo count (semadj) for this semaphore. If the absolute value of sem_op is greater than semval, and IPC_NOWAIT is specified in sem_flg, semop() fails, with errno set to EAGAIN (and none of the operations in sops is performed). Otherwise semncnt (the counter of processes waiting for this semaphore's value to increase) is incremented by one and the process sleeps until one of the following occurs:

  • semval becomes greater than or equal to the absolute value of sem_op, at which time the value of semncnt is decremented, the absolute value of sem_op is subtracted from semval and, if SEM_UNDO is specified for this operation, the system updates the process undo count (semadj) for this semaphore.

  • The semaphore set is removed from the system: semop() fails, with errno set to EIDRM.

  • The calling process catches a signal: the value of semncnt is decremented and semop() fails, with errno set to EINTR.

  • The time limit specified by timeout in a semtimedop() call expires: the system call fails, with errno set to EAGAIN.

On successful completion, the sempid value for each semaphore specified in the array pointed to by sops is set to the process ID of the calling process. In addition, the sem_otime is set to the current time.

semtimedop() behaves identically to semop() except that in those cases were the calling process would sleep, the duration of that sleep is limited by the amount of elapsed time specified by the timespec structure whose address is passed in the timeout parameter. If the specified time limit has been reached, semtimedop() fails with errno set to EAGAIN (and none of the operations in sops is performed). If the timeout parameter is NULL, then semtimedop() behaves exactly like semop().

RETURN VALUE

If successful semop() and semtimedop() return 0; otherwise they return −1 with errno indicating the error.

ERRORS

On failure, errno is set to one of the following:

E2BIG

The argument nsops is greater than SEMOPM, the maximum number of operations allowed per system call.

EACCES

The calling process does not have the permissions required to perform the specified semaphore operations, and does not have the CAP_IPC_OWNER capability.

EAGAIN

An operation could not proceed immediately and either IPC_NOWAIT was specified in sem_flg or the time limit specified in timeout expired.

EFAULT

An address specified in either the sops or timeout parameters isn't accessible.

EFBIG

For some operation the value of sem_num is less than 0 or greater than or equal to the number of semaphores in the set.

EIDRM

The semaphore set was removed.

EINTR

While blocked in this system call, the process caught a signal.

EINVAL

The semaphore set doesn't exist, or semid is less than zero, or nsops has a non-positive value.

ENOMEM

The sem_flg of some operation specified SEM_UNDO and the system does not have enough memory to allocate the undo structure.

ERANGE

For some operation sem_op+semval is greater than SEMVMX, the implementation dependent maximum value for semval.

VERSIONS

semtimedop() first appeared in Linux 2.5.52, and was subsequently backported into kernel 2.4.22. Glibc support for semtimedop() first appeared in version 2.3.3.

CONFORMING TO

SVr4, POSIX.1-2001.

NOTES

The sem_undo structures of a process aren't inherited across a fork(2) system call, but they are inherited across an execve(2) system call.

semop() is never automatically restarted after being interrupted by a signal handler, regardless of the setting of the SA_RESTART flag when establishing a signal handler.

semadj is a per-process integer which is simply the (negative) count of all semaphore operations performed specifying the SEM_UNDO flag. When a semaphore's value is directly set using the SETVAL or SETALL request to semctl(2), the corresponding semadj values in all processes are cleared.

The semval, sempid, semzcnt, and semnct values for a semaphore can all be retrieved using appropriate semctl(2) calls.

The following limits on semaphore set resources affect the semop() call:

SEMOPM

Maximum number of operations allowed for one semop() call (32) (on Linux, this limit can be read and modified via the third field of /proc/sys/kernel/sem).

SEMVMX

Maximum allowable value for semval: implementation dependent (32767).

The implementation has no intrinsic limits for the adjust on exit maximum value (SEMAEM), the system wide maximum number of undo structures (SEMMNU) and the per-process maximum number of undo entries system parameters.

BUGS

When a process terminates, its set of associated semadj structures is used to undo the effect of all of the semaphore operations it performed with the SEM_UNDO flag. This raises a difficulty: if one (or more) of these semaphore adjustments would result in an attempt to decrease a semaphore's value below zero, what should an implementation do? One possible approach would be to block until all the semaphore adjustments could be performed. This is however undesirable since it could force process termination to block for arbitrarily long periods. Another possibility is that such semaphore adjustments could be ignored altogether (somewhat analogously to failing when IPC_NOWAIT is specified for a semaphore operation). Linux adopts a third approach: decreasing the semaphore value as far as possible (i.e., to zero) and allowing process termination to proceed immediately.

In kernels 2.6.x, x <= 10, there is a bug that in some circumstances prevents a process that is waiting for a semaphore value to become zero from being woken up when the value does actually become zero. This bug is fixed in kernel 2.6.11.

EXAMPLE

The following code segment uses semop() to atomically wait for the value of semaphore 0 to become zero, and then increment the semaphore value by one.

    struct sembuf sops[2];
    int semid;

    /* Code to set semid omitted */

    sops[0].sem_num = 0;        /* Operate on semaphore 0 */
    sops[0].sem_op = 0;         /* Wait for value to equal 0 */
    sops[0].sem_flg = 0;

    sops[1].sem_num = 0;        /* Operate on semaphore 0 */
    sops[1].sem_op = 0;         /* Increment value by one */
    sops[1].sem_flg = 0;

    if (semop(semid, &sop, 2) == −1) {
        perror("semop");
        exit(EXIT_FAILURE);
    }

SEE ALSO

semctl(2), semget(2), sigaction(2), capabilities(7), sem_overview(7), svipc(7)

COLOPHON

This page is part of release 2.79 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.


  Copyright 1993 Giorgio Ciucci (giorgiocrcc.it)

Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided that the
entire resulting derived work is distributed under the terms of a
permission notice identical to this one.

Since the Linux kernel and libraries are constantly changing, this
manual page may be incorrect or out-of-date.  The author(s) assume no
responsibility for errors or omissions, or for damages resulting from
the use of the information contained herein.  The author(s) may not
have taken the same level of care in the production of this manual,
which is licensed free of charge, as they might when working
professionally.

Formatted or processed versions of this manual, if unaccompanied by
the source, must acknowledge the copyright and authors of this work.

Modified 1996-10-22, Eric S. Raymond <esrthyrsus.com>
Modified 2002-01-08, Michael Kerrisk <mtk.manpagesgmail.com>
Modified 2003-04-28, Ernie Petrides <petridesredhat.com>
Modified 2004-05-27, Michael Kerrisk <mtk.manpagesgmail.com>
Modified, 11 Nov 2004, Michael Kerrisk <mtk.manpagesgmail.com>
Language and formatting clean-ups
Added notes on /proc files
2005-04-08, mtk, Noted kernel version numbers for semtimedop()
2007-07-09, mtk, Added an EXAMPLE code segment.