Name

fmtmsg — print formatted error messages

Synopsis

#include <fmtmsg.h>
int fmtmsg( long   classification,
  const char *  label,
  int   severity,
  const char *  text,
  const char *  action,
  const char *  tag);

DESCRIPTION

This function displays a message described by its parameters on the device(s) specified in the classification parameter. For messages written to stderr, the format depends on the MSGVERB environment variable.

The label parameter identifies the source of the message. The string must consist of two colon separated parts where the first part has not more than 10 and the second part not more than 14 characters.

The text parameter describes the condition of the error.

The action parameter describes possible steps to recover from the error. If it is printed, it is prefixed by "TO FIX: ".

The tag parameter is a reference to the online documentation where more information can be found. It should contain the label value and a unique identification number.

Dummy parameters

Each of the parameters can have a dummy value. The dummy classification value MM_NULLMC (0L) does not specify any output, so nothing is printed. The dummy severity value NO_SEV (0) says that no severity is supplied. The values MM_NULLLBL, MM_NULLTXT, MM_NULLACT, MM_NULLTAG are synonyms for ((char *) 0), the empty string, and MM_NULLSEV is a synonym for NO_SEV.

The classification parameter

The classification

parameter is the sum of values describing 4 types of information.

The first value defines the output channel.

MM_PRINT

Output to stderr.

MM_CONSOLE

Output to the system console.

MM_PRINT | MM_CONSOLE

Output to both.

The second value is the source of the error:

MM_HARD

A hardware error occurred.

MM_FIRM

A firmware error occurred.

MM_SOFT

A software error occurred.

The third value encodes the detector of the problem:

MM_APPL

It is detected by an application.

MM_UTIL

It is detected by a utility.

MM_OPSYS

It is detected by the operating system.

The fourth value shows the severity of the incident:

MM_RECOVER

It is a recoverable error.

MM_NRECOV

It is a non-recoverable error.

The severity parameter

The severity parameter can take one of the following values:

MM_NOSEV

No severity is printed.

MM_HALT

This value is printed as HALT.

MM_ERROR

This value is printed as ERROR.

MM_WARNING

This value is printed as WARNING.

MM_INFO

This value is printed as INFO.

The numeric values are between 0 and 4. Using addseverity(3) or the environment variable SEV_LEVEL you can add more levels and strings to print.

RETURN VALUE

The function can return 4 values:

MM_OK

Everything went smooth.

MM_NOTOK

Complete failure.

MM_NOMSG

Error writing to stderr.

MM_NOCON

Error writing to the console.

ENVIRONMENT

The environment variable MSGVERB ("message verbosity") can be used to suppress parts of the output to stderr. (It does not influence output to the console.) When this variable is defined, is non-NULL, and is a colon-separated list of valid keywords, then only the parts of the message corresponding to these keywords is printed. Valid keywords are "label", "severity", "text", "action" and "tag".

The environment variable SEV_LEVEL can be used to introduce new severity levels. By default, only the five severity levels described above are available. Any other numeric value would make fmtmsg() print nothing. If the user puts SEV_LEVEL with a format like

SEV_LEVEL=[description[:description[:...]]]

in the environment of the process before the first call to fmtmsg(), where each description is of the form

severity-keyword,level,printstring

then fmtmsg() will also accept the indicated values for the level (in addition to the standard levels 0-4), and use the indicated printstring when such a level occurs.

The severity-keyword part is not used by fmtmsg() but it has to be present. The level part is a string representation of a number. The numeric value must be a number greater than 4. This value must be used in the severity parameter of fmtmsg() to select this class. It is not possible to overwrite any of the predefined classes. The printstring is the string printed when a message of this class is processed by fmtmsg().

CONFORMING TO

The functions fmtmsg() and addseverity(3), and environment variables MSGVERB and SEV_LEVEL come from System V. The function fmtmsg() and the environment variable MSGVERB are described in POSIX.1-2001.

NOTES

System V and Unixware man pages tell us that these functions have been replaced by "pfmt() and addsev()" or by "pfmt(), vpfmt(), lfmt(), and vlfmt()", and will be removed later.

EXAMPLE

#include <stdio.h>
#include <stdlib.h>
#include <fmtmsg.h>

int
main(void)
{
    long class = MM_PRINT | MM_SOFT | MM_OPSYS | MM_RECOVER;
    int err;

    err = fmtmsg(class, "util−linux:mount", MM_ERROR,
                "unknown mount option", "See mount(8).",
                "util−linux:mount:017");
    switch (err) {
    case MM_OK:
        break;
    case MM_NOTOK:
        printf("Nothing printed\n");
        break;
    case MM_NOMSG:
        printf("Nothing printed to stderr\n");
        break;
    case MM_NOCON:
        printf("No console output\n");
        break;
    default:
        printf("Unknown error from fmtmsg()\n");
    }
    exit(EXIT_SUCCESS);
}

The output should be:

    util−linux:mount: ERROR: unknown mount option
    TO FIX: See mount(8).  util−linux:mount:017

and after

    MSGVERB=text:action; export MSGVERB

the output becomes:

    unknown mount option
    TO FIX: See mount(8).

SEE ALSO

addseverity(3), perror(3)

COLOPHON

This page is part of release 2.79 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.


   Copyright 2002 walter harms (walter.harmsinformatik.uni-oldenburg.de)
 Distributed under GPL
 adapted glibc info page

 This should run as 'Guru Meditation' (amiga joke :)
 The function is quite complex and deserves an example

 Polished, aeb, 2003-11-01