getaddrinfo, freeaddrinfo, gai_strerror — network address and service translation
#include <sys/types.h> #include <sys/socket.h> #include <netdb.h>
int
getaddrinfo( |
const char * | node, |
const char * | service, | |
const struct addrinfo * | hints, | |
struct addrinfo ** | res) ; |
void
freeaddrinfo( |
struct addrinfo * | res) ; |
const
char *gai_strerror( |
int | errcode) ; |
Given node
and
service
, getaddrinfo
() returns one or more
structures containing values that can be used by the
bind(2) and connect(2) system calls to
create a client or a server socket. The getaddrinfo
() function combines the
functionality provided by the getservbyname(3) and
getservbyport(3) functions
into a single interface, but unlike the latter functions,
getaddrinfo
() is reentrant and
allows programs to eliminate IPv4-versus-IPv6
dependencies.
The addrinfo structure used by this function contains the following members:
struct addrinfo { int ai_flags
;int ai_family
;int ai_socktype
;int ai_protocol
;size_t ai_addrlen
;struct sockaddr * ai_addr
;char * ai_canonname
;struct addrinfo * ai_next
;};
getaddrinfo
() sets
res
to point to a
dynamically allocated linked list of addrinfo structures, linked by the
ai_next
member. There
are several reasons why the linked list may have more than
one addrinfo structure,
including: if the network host is multi-homed; or if the same
service is available from multiple socket protocols (one
SOCK_STREAM
address and another
SOCK_DGRAM
address, for
example).
The hints
parameter points to an addrinfo structure that specifies
criteria for selecting the socket address structures returned
in the list pointed to by res
. If this parameter is not
NULL it points to an addrinfo
structure whose ai_family
, ai_socktype
, and ai_protocol
members specify the
preferred socket type. AF_UNSPEC
in ai_family
specifies any
protocol family (either IPv4 or IPv6, for example). 0 in
ai_socktype
or
ai_protocol
specifies
that any socket type or protocol is acceptable as well. The
ai_flags
member
specifies additional options, defined below. Multiple flags
are specified by logically OR-ing them together. All the
other members in the hints
parameter must contain
either 0, or a null pointer. Specifying hints
as NULL is equivalent to
setting ai_socktype
and ai_protocol
to 0;
ai_family
to
AF_UNSPEC
; and ai_flags
to (AI_V4MAPPED | AI_ADDRCONFIG).
The node
or
service
parameter,
but not both, may be NULL. node
specifies either a
numerical network address (dotted-decimal format for IPv4,
hexadecimal format for IPv6) or a network hostname, whose
network addresses are looked up and resolved. If hints.ai_flags
contains the
AI_NUMERICHOST
flag then the
node
parameter must
be a numerical network address. The AI_NUMERICHOST
flag suppresses any
potentially lengthy network host address lookups.
The getaddrinfo
() function
creates a linked list of addrinfo structures, one for each network
address subject to any restrictions imposed by the hints
parameter. The ai_canonname
field of the first
of these addrinfo structures
is set to point to the official name of the host, if
hints.ai_flags
includes the AI_CANONNAME
flag.
ai_family
, ai_socktype
, and ai_protocol
specify the socket
creation parameters (i.e., these fields have the same meaning
as the corresponding parameters of socket(2)). A pointer to
the socket address is placed in the ai_addr
member, and the length
of the socket address, in bytes, is placed in the ai_addrlen
member.
The getaddrinfo
() function
returns socket addresses in either IPv4 or IPv6 address
family (ai_family
will be set to either AF_INET
or AF_INET6
).
If node
is NULL,
the network address in each socket structure is initialized
according to the AI_PASSIVE
flag, which is set in hints.ai_flags
. The network
address in each socket structure will be left unspecified if
AI_PASSIVE
flag is set. This is
used by server applications, which intend to accept client
connections on any network address. The network address will
be set to the loopback interface address if the AI_PASSIVE
flag is not set. This is used by
client applications, which intend to connect to a server
running on the same network host.
If hints.ai_flags
includes the
AI_ADDRCONFIG
flag, then IPv4
addresses are returned in the list pointed to by result
only if the local system
has at least one IPv4 address configured, and IPv6 addresses
are only returned if the local system has at least one IPv6
address configured.
If hint.ai_flags
specifies the AI_V4MAPPED
flag,
and hints.ai_family
was specified as AF_INET6
, and
no matching IPv6 addresses could be found, then return
IPv4-mapped IPv6 addresses in the list pointed to by
result
. If both
AI_V4MAPPED
and AI_ALL
are specified in hints.ai_family
, then return
both IPv6 and IPv4-mapped IPv6 addresses in the list pointed
to by result
.
AI_ALL
is ignored if
AI_V4MAPPED
is not also
specified.
service
sets the
port number in the network address of each socket structure.
If service
is NULL
the port number will be left uninitialized. If AI_NUMERICSERV
is specified in hints.ai_flags
and service
is not NULL, then
service
must point to
a string containing a numeric port number. This flag is used
to inhibit the invocation of a name resolution service in
cases where it is known not to be required.
The freeaddrinfo
() function
frees the memory that was allocated for the dynamically
allocated linked list res
.
Starting with glibc 2.3.4, getaddrinfo
() has been extended to
selectively allow the incoming and outgoing host names to
be transparently converted to and from the
Internationalized Domain Name (IDN) format (see RFC 3490,
Internationalizing Domain Names
in Applications (IDNA)). Four new flags are
defined:
AI_IDN
If this flag is specified, then the node name
given in node
is converted to IDN format if necessary. The source
encoding is that of the current locale.
If the input name contains non-ASCII characters, then the IDN encoding is used. Those parts of the node name (delimited by dots) that contain non-ASCII characters are encoded using ASCII Compatible Encoding (ACE) before being passed to the name resolution functions.
AI_CANONIDN
After a successful name lookup, and if the
AI_CANONNAME
flag was
specified, getaddrinfo
() will return the
canonical name of the node corresponding to the
addrinfo structure
value passed back. The return value is an exact copy
of the value returned by the name resolution
function.
If the name is encoded using ACE, then it will
contain the xn−−
prefix for one or more components of the name. To
convert these components into a readable form the
AI_CANONIDN
flag can be
passed in addition to AI_CANONNAME
. The resulting string
is encoded using the current locale's encoding.
AI_IDN_ALLOW_UNASSIGNED
, AI_IDN_USE_STD3_ASCII_RULES
Setting these flags will enable the IDNA_ALLOW_UNASSIGNED (allow unassigned Unicode code points) and IDNA_USE_STD3_ASCII_RULES (check output to make sure it is a STD3 conforming host name) flags respectively to be used in the IDNA handling.
getaddrinfo
() returns 0 if
it succeeds, or one of the following nonzero error codes:
EAI_ADDRFAMILY
The specified network host does not have any network addresses in the requested address family.
EAI_AGAIN
The name server returned a temporary failure indication. Try again later.
EAI_BADFLAGS
ai_flags
contains invalid flags.
EAI_FAIL
The name server returned a permanent failure indication.
EAI_FAMILY
The requested address family is not supported at all.
EAI_MEMORY
Out of memory.
EAI_NODATA
The specified network host exists, but does not have any network addresses defined.
EAI_NONAME
The node
or
service
is not
known; or both node
and service
are NULL; or
AI_NUMERICSERV
was
specified in hints.ai_flags
and
service
was not
a numeric port-number string.
EAI_SERVICE
The requested service is not available for the requested socket type. It may be available through another socket type.
EAI_SOCKTYPE
The requested socket type is not supported at all.
EAI_SYSTEM
Other system error, check errno
for details.
The gai_strerror
() function
translates these error codes to a human readable string,
suitable for error reporting.
AI_ADDRCONFIG
, AI_ALL
, and AI_V4MAPPED
are available since glibc
2.3.3. AI_NUMERICSERV
is
available since glibc 2.3.4.
The following programs demonstrate the use of getaddrinfo
(), gai_strerror
(), freeaddrinfo
(), and getnameinfo(3). The
programs are an echo server and client for UDP datagrams.
This is the server:
#include <sys/types.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #include <sys/socket.h> #include <netdb.h> #define BUF_SIZE 500 int main(int argc, char *argv[]) { struct addrinfo hints; struct addrinfo *result, *rp; int sfd, s; struct sockaddr_storage peer_addr; socklen_t peer_addr_len; ssize_t nread; char buf[BUF_SIZE]; if (argc != 2) { fprintf(stderr, "Usage: %s port\n", argv[0]); exit(EXIT_FAILURE); } memset(&hints, 0, sizeof(struct addrinfo)); hints.ai_family = AF_UNSPEC; /* Allow IPv4 or IPv6 */ hints.ai_socktype = SOCK_DGRAM; /* Datagram socket */ hints.ai_flags = AI_PASSIVE; /* For wildcard IP address */ hints.ai_protocol = 0; /* Any protocol */ hints.ai_canonname = NULL; hints.ai_addr = NULL; hints.ai_next = NULL; s = getaddrinfo(NULL, argv[1], &hints, &result); if (s != 0) { fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(s)); exit(EXIT_FAILURE); } /* getaddrinfo() returns a list of address structures. Try each address until we successfully bind(2). If socket(2) (or bind(2)) fails, we (close the socket and) try the next address. */ for (rp = result; rp != NULL; rp = rp−>ai_next) { sfd = socket(rp−>ai_family, rp−>ai_socktype, rp−>ai_protocol); if (sfd == −1) continue; if (bind(sfd, rp−>ai_addr, rp−>ai_addrlen) == 0) break; /* Success */ close(sfd); } if (rp == NULL) { /* No address succeeded */ fprintf(stderr, "Could not bind\n"); exit(EXIT_FAILURE); } freeaddrinfo(result); /* No longer needed */ /* Read datagrams and echo them back to sender */ for (;;) { peer_addr_len = sizeof(struct sockaddr_storage); nread = recvfrom(sfd, buf, BUF_SIZE, 0, (struct sockaddr *) &peer_addr, &peer_addr_len); if (nread == −1) continue; /* Ignore failed request */ char host[NI_MAXHOST], service[NI_MAXSERV]; s = getnameinfo((struct sockaddr *) &peer_addr, peer_addr_len, host, NI_MAXHOST, service, NI_MAXSERV, NI_NUMERICSERV); if (s == 0) printf("Received %ld bytes from %s:%s\n", (long) nread, host, service); else fprintf(stderr, "getnameinfo: %s\n", gai_strerror(s)); if (sendto(sfd, buf, nread, 0, (struct sockaddr *) &peer_addr, peer_addr_len) != nread) fprintf(stderr, "Error sending response\n"); } }
This is the client:
#include <sys/types.h> #include <sys/socket.h> #include <netdb.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #define BUF_SIZE 500 int main(int argc, char *argv[]) { struct addrinfo hints; struct addrinfo *result, *rp; int sfd, s, j; size_t len; ssize_t nread; char buf[BUF_SIZE]; if (argc < 3) { fprintf(stderr, "Usage: %s host port msg...\n", argv[0]); exit(EXIT_FAILURE); } /* Obtain address(es) matching host/port */ memset(&hints, 0, sizeof(struct addrinfo)); hints.ai_family = AF_UNSPEC; /* Allow IPv4 or IPv6 */ hints.ai_socktype = SOCK_DGRAM; /* Datagram socket */ hints.ai_flags = 0; hints.ai_protocol = 0; /* Any protocol */ s = getaddrinfo(argv[1], argv[2], &hints, &result); if (s != 0) { fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(s)); exit(EXIT_FAILURE); } /* getaddrinfo() returns a list of address structures. Try each address until we successfully connect(2). If socket(2) (or connect(2)) fails, we (close the socket and) try the next address. */ for (rp = result; rp != NULL; rp = rp−>ai_next) { sfd = socket(rp−>ai_family, rp−>ai_socktype, rp−>ai_protocol); if (sfd == −1) continue; if (connect(sfd, rp−>ai_addr, rp−>ai_addrlen) != −1) break; /* Success */ close(sfd); } if (rp == NULL) { /* No address succeeded */ fprintf(stderr, "Could not connect\n"); exit(EXIT_FAILURE); } freeaddrinfo(result); /* No longer needed */ /* Send remaining command−line arguments as separate datagrams, and read responses from server */ for (j = 3; j < argc; j++) { len = strlen(argv[j]) + 1; /* +1 for terminating null byte */ if (len + 1 > BUF_SIZE) { fprintf(stderr, "Ignoring long message in argument %d\n", j); continue; } if (write(sfd, argv[j], len) != len) { fprintf(stderr, "partial/failed write\n"); exit(EXIT_FAILURE); } nread = read(sfd, buf, BUF_SIZE); if (nread == −1) { perror("read"); exit(EXIT_FAILURE); } printf("Received %ld bytes: %s\n", (long) nread, buf); } exit(EXIT_SUCCESS); }
This page is part of release 2.79 of the Linux man-pages
project. A
description of the project, and information about reporting
bugs, can be found at
http://www.kernel.org/doc/man-pages/.
Copyright 2000 Sam Varshavchik <mrsamcourier-mta.com> and Copyright (c) 2007 Michael Kerrisk <mtk.manpagesgmail.com> Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Since the Linux kernel and libraries are constantly changing, this manual page may be incorrect or out-of-date. The author(s) assume no responsibility for errors or omissions, or for damages resulting from the use of the information contained herein. The author(s) may not have taken the same level of care in the production of this manual, which is licensed free of charge, as they might when working professionally. Formatted or processed versions of this manual, if unaccompanied by the source, must acknowledge the copyright and authors of this work. References: RFC 2553 2005-08-09, mtk, added AI_ALL, AI_ADDRCONFIG, AI_V4MAPPED, and AI_NUMERICSERV. 2007-06-08, mtk: added example programs 2008-02-26, mtk; clarify discussion of NULL 'hints' argument; other minor rewrites. |